Caution signs




HOW TO GET ALL CAUTION SIGNS IN UNIPLAYER
STOP...
Before you go off cheating you need to know that each level/screen has one(1) caution sign, So each number means each level/screen.






1. On top of the bed when you start 
2. Just after the 'slide sign' but before you have to slide - You need to jump 
3. Near the stairs - Run jump from the top 
4. Near the end - where there is a dip in the ground 
5. Near the end - after you slide run left 
6. After the flag, its in the air - Jump on slide platform and jump to sign 
7. In air near beginning - Use first tramp to jump to it 
8. After spike hallway between the spikes and the tramps - Use the tramps to reach it, but don't go into the spikes 
9. Just up and to the left of the first laser - Teleport, Jump over the teleporter and land on platform above the laser 
10. Above the first teleporter - Use the first teleporter, than teleport back and jump up 
11. Right after turnstile - Than jump 
12. Above start point - Use tramp to jump over the ax platform and land on the sign 
13. Above first swinging ax - Use the tramp at the end of the ax line, and jump from ax platform to the platform on the left 
14. Towards beginning below the teleporter - Use first teleporter, jump back and down to the sign 
15. Just past the second laser - Jump from the 2 high blocks and  jump to sign on the left before the laser kills you 
16. At the beginning - Just jump 
17. At the big sign with the red writing, below the red 'O' in 'Freedom' - Jump from the platform on the right 
18. Towards the end of the level at the last red light/siren - Jump 
19. Above the first tramp - Use tramp to reach it 
20. Below you when you start - Jump left off the screen and come back to the right 
21. At the beginning by first stair on the ground, slightly hidden - Walk there 
22. At beginning - Just jump 
23. At beginning of spike hallway - Jump 
24. Above third set of swinging axes - Use teleporter and jump 
25. At the beginning of the sign, slightly hidden - Jump 
26. On top of first spike wall - Use tramp to jump to it 
27. Above start point hidden in the ground - Use first tramp to jump to it 
28. Above start point hidden in the ground - After you pass swinging axes ran on the platform back to the start 
29. Toward the end, left of the laser and above the saw - Land on the ledge by the saw and jump to the sign 
30. Above start point hidden in the ground - Use second tramp to jump onto the platform by the starting area






I hope this helped

No comments:

Post a Comment